A set of five slim cylindrical DPA condenser microphones with mesh-covered capsule grids, shown with mounting clips and foam windscreens.

DPA 5006A — Microphone

$19,168.00
$19,168.00
Skip to product information
A set of five slim cylindrical DPA condenser microphones with mesh-covered capsule grids, shown with mounting clips and foam windscreens.
  • A set of five slim cylindrical DPA condenser microphones with mesh-covered capsule grids, shown with mounting clips and foam windscreens.
  • A set of five slim cylindrical DPA condenser microphones with mesh-covered capsule grids, shown with mounting clips and foam windscreens.
DPA 5006A — Microphone

DPA 5006A — Microphone

Five factory-matched DPA 4006A omnidirectional condenser microphones designed for surround and multichannel recording, each with linear response from 10 Hz to 20 kHz and matched within ±0.5 dB for consistent performance across channels.

$19,168.00
$19,168.00
Condition Brand New
Specs Verified model facts
Checked against 1 listing
Verified
Use Engineers capturing surround and multichannel sound, plus stereo classical, acoustic, and ambience recording, who need five omnidirectional condensers factory-matched (±0.5 dB) for consistent multichannel arrays with a linear 10 Hz–20 kHz response.
Requires appropriate audio and data cables, compatible monitoring, mounting, or power setup
In stock Ask a question

Specifications

Surround microphone kit · 48 V (±4 V)

Overview

Brand DPA
Model 5006A
Product Type Surround microphone kit
Microphone Type Pre-polarized condenser
Included Microphones Five factory-matched DPA 4006A

Kit Contents & Matching

Microphones 5 x factory-matched 4006A
Case Peli carrying case
Included Accessories Clips/holders, grids, windscreens
Matching Tolerance ±0.5 dB (frequency response and sensitivity)

Acoustic (per 4006A)

Polar Pattern Omnidirectional
Frequency Response 10 Hz – 20 kHz (±2 dB)
Sensitivity 40 mV/Pa; -28 dB re. 1 V/Pa
Equivalent Noise Level (A-weighted) ~15 dB(A)
Max SPL 147 dB (peak before clipping)
Dynamic Range ~124 dB

Electrical & Connectivity

Connector XLR-3M
Phantom Power 48 V (±4 V)
Current Consumption 2.8 mA
Switchable Attenuator 0 dB / -20 dB
Cable Drive Capability Up to 100 m (328 ft)

Fit and constraints

Engineers capturing surround and multichannel s… · 48 V (±4 V)

Intended use

Use Engineers capturing surround and multichannel sound, plus stereo classical, acoustic, and ambience recording, who need five omnidirectional condensers factory-matched (±0.5 dB) for consistent multichannel arrays with a linear 10 Hz–20 kHz response.
Not for Anyone needing a directional/cardioid pattern for off-axis rejection, a single-mic or budget solution, or close-miking of individual loud sources where isolation matters — this is an omnidirectional-only matched five-piece set.

Constraints

Power48 V (±4 V)
ControlsDetailed electro-acoustic figures (sensitivity, ~15 dB(A) noise, 147 dB max SPL, ~124 d...

To use it

Required appropriate audio and data cables, compatible monitoring, mounting, or power setup

Questions

3 to ask before buying

Which connections, drivers, operating systems, and sample rates are supported by this exact revision?

Ask before you buy via contact. Confirm power, condition grade, and included items against the listing photos.

What cables, mounts, power supplies, or licenses are included?

Ask before you buy via contact. Confirm power, condition grade, and included items against the listing photos.

Is the current retailer listing new stock, demo stock, open box, or special order?

Ask before you buy via contact. Confirm power, condition grade, and included items against the listing photos.

Description

Product details

The DPA 5006A is a surround microphone kit containing five factory-matched DPA 4006A omnidirectional condenser microphones supplied with clips, windscreens, and grids in a Peli carrying case. The 4006A capsules are pre-polarized condensers with an omnidirectional pattern and a linear frequency response of 10 Hz to 20 kHz (±2 dB). The five microphones are matched to within ±0.5 dB in both frequency response and sensitivity so they can be used together in multichannel and surround arrays. Each microphone uses an XLR-3M output and requires 48 V phantom power.

You may also like