DPA 3532-SP stereo kit: two matched 4041-SP large-diaphragm omnidirectional condenser microphones with stainless-steel cylindrical bodies, shown with their stereo boom mounting hardware.

DPA 3532-SP — Microphone

$16,250.00
$16,250.00
Skip to product information
DPA 3532-SP stereo kit: two matched 4041-SP large-diaphragm omnidirectional condenser microphones with stainless-steel cylindrical bodies, shown with their stereo boom mounting hardware.
  • DPA 3532-SP stereo kit: two matched 4041-SP large-diaphragm omnidirectional condenser microphones with stainless-steel cylindrical bodies, shown with their stereo boom mounting hardware.
  • DPA 3532-SP — Microphone, studio recording microphone body
  • DPA 3532-SP stereo kit: two matched 4041-SP large-diaphragm omnidirectional condenser microphones with stainless-steel cylindrical bodies, shown with their stereo boom mounting hardware.
  • DPA 3532-SP — Microphone, studio recording microphone body
DPA 3532-SP — Microphone

DPA 3532-SP — Microphone

$16,250.00
$16,250.00
Condition Brand New
Specs Verified model facts
Checked against 1 listing
Verified
Use Engineers recording acoustic sources in true A-B (spaced pair) stereo — grand piano, choirs, strings, wind instruments, drum overheads, and classical/jazz/folk ensembles — who need a factory-matched pair of very low-noise (max 8 dB(A)), high-headroom (134 dB SPL peak) omnidirectional…
Requires appropriate audio and data cables, compatible monitoring, mounting, or power setup
In stock Ask a question

Specifications

A-B stereo kit with two matched 4041-SP omnidirectional microphones · 48 V phantom power (P48)

General

Kit type A-B stereo kit with two matched 4041-SP omnidirectional microphones
Microphone type Large-diaphragm omnidirectional condenser (solid state, P48)
Polar pattern Omnidirectional
Capsule / preamp 2x MMC4041 capsules with 2x MMP4000-SP preamplifiers
Pair matching Matched within 1 dB on frequency response, sensitivity and self-noise

Audio Performance

Frequency response 20 Hz - 20 kHz with 4-6 dB soft boost at 8 kHz
Sensitivity 70 mV/Pa (nominal)
Equivalent noise level (A-weighted) Max 8 dB(A) re. 20 uPa
Equivalent noise level (ITU-R BS.468-4) Max 20 dB
S/N ratio (re. 1 kHz at 94 dB SPL) 86 dB(A)
Dynamic range Typ. 118 dB
Max SPL (peak before clipping) 134 dB SPL peak
Total harmonic distortion <0.5% THD up to 120 dB SPL peak; <1% THD up to 126 dB SPL peak

Electrical

Output impedance <200 Ohm
Power 48 V phantom power (P48)
Current consumption 2.20 mA
Connector 3-pin XLR-M (standard P48)

Physical (per microphone)

Capsule diameter 24 mm (1 in)
Length 170 mm (6.69 in)
Weight 190 g (6.7 oz)
Construction Stainless-steel diaphragm and housing

In the Box

Kit contents 2x 4041-SP microphones (MMC4041 capsules + MMP4000-SP preamps), 2x foam windscreens, 2x microphone holders, stereo boom assembly
Case and adapters Carrying case and thread adapters included; limited 5-year warranty

Fit and constraints

Engineers recording acoustic sources in true A-… · 48 V phantom power (P48)

Intended use

Use Engineers recording acoustic sources in true A-B (spaced pair) stereo — grand piano, choirs, strings, wind instruments, drum overheads, and classical/jazz/folk ensembles — who need a factory-matched pair of very low-noise (max 8 dB(A)), high-headroom (134 dB SPL peak) omnidirectional large-diaphragm condensers.
Not for Anyone who needs directional pickup: these are omnidirectional only, so there is no off-axis rejection for isolating sources, rejecting room sound, or resisting feedback on loud stages. Also not the right buy if you only need a single utility condenser — this is a matched two-microphone kit with a commensurate price, and the source retailer currently lists it as unavailable.

Constraints

Power48 V phantom power (P48)
ControlsSources disagree on pair-matching tolerance: verified retail listing states +/-0.5 dB w...

To use it

Required appropriate audio and data cables, compatible monitoring, mounting, or power setup

Questions

3 to ask before buying

Which connections, drivers, operating systems, and sample rates are supported by this exact revision?

Ask before you buy via contact. Confirm power, condition grade, and included items against the listing photos.

What cables, mounts, power supplies, or licenses are included?

Ask before you buy via contact. Confirm power, condition grade, and included items against the listing photos.

Is the current retailer listing new stock, demo stock, open box, or special order?

Ask before you buy via contact. Confirm power, condition grade, and included items against the listing photos.

Description

Product details

The DPA 3532-SP is an A-B stereo kit containing two factory-matched 4041-SP large-diaphragm omnidirectional condenser microphones. Each 4041-SP combines an MMC4041 24 mm large-diaphragm capsule with an MMP4000-SP preamplifier and operates on standard 48 V phantom power (P48) via a 3-pin XLR-M connector. The microphones cover 20 Hz - 20 kHz with a 4-6 dB soft boost at 8 kHz, handle up to 134 dB SPL peak, and have a self-noise of max 8 dB(A). The kit includes a stereo boom, microphone holders, foam windscreens, thread adapters, and a carrying case, and is intended for spaced-pair stereo recording of sources such as piano, choirs, strings, and drum overheads.

You may also like