A single Grimm Audio LS1v2 active loudspeaker in natural bamboo veneer: a tall two-way monitor suspended between two curved half-cylinder side panels that form an integral two-legged floor stand, with an 8-inch woofer above a 1-inch dome tweeter on the front baffle.

GRIMM AUDIO LS1v2 (Natural Bamboo Veneer) — Studio Monitor

$32,350.00
$32,350.00
Skip to product information
A single Grimm Audio LS1v2 active loudspeaker in natural bamboo veneer: a tall two-way monitor suspended between two curved half-cylinder side panels that form an integral two-legged floor stand, with an 8-inch woofer above a 1-inch dome tweeter on the front baffle.
  • A single Grimm Audio LS1v2 active loudspeaker in natural bamboo veneer: a tall two-way monitor suspended between two curved half-cylinder side panels that form an integral two-legged floor stand, with an 8-inch woofer above a 1-inch dome tweeter on the front baffle.
  • GRIMM AUDIO LS1v2 (Natural Bamboo Veneer) — Studio Monitor, nearfield reference loudspeaker
  • GRIMM AUDIO LS1v2 (Natural Bamboo Veneer) — Studio Monitor, nearfield reference loudspeaker
  • A single Grimm Audio LS1v2 active loudspeaker in natural bamboo veneer: a tall two-way monitor suspended between two curved half-cylinder side panels that form an integral two-legged floor stand, with an 8-inch woofer above a 1-inch dome tweeter on the front baffle.
  • GRIMM AUDIO LS1v2 (Natural Bamboo Veneer) — Studio Monitor, nearfield reference loudspeaker
  • GRIMM AUDIO LS1v2 (Natural Bamboo Veneer) — Studio Monitor, nearfield reference loudspeaker
GRIMM AUDIO LS1v2 (Natural Bamboo Veneer) — Studio Monitor

GRIMM AUDIO LS1v2 (Natural Bamboo Veneer) — Studio Monitor

Two-way active studio monitor from the Netherlands with an 8-inch Seas woofer and 1-inch tweeter powered by dual 180W Class D amplifiers, onboard DSP processing, and integrated stand design. Accepts digital and analog inputs plus includes USB interface.

$32,350.00
$32,350.00
Condition Brand New
Specs Verified model facts
Checked against 1 listing
Verified
Use Mixing and mastering engineers, and audiophiles, who want a fully active, DSP-corrected two-way with phase-linear response and an integrated floor stand for near/midfield use in treated rooms.
Requires appropriate audio and data cables, compatible monitoring, mounting, or power setup
In stock Ask a question

Specifications

Active · Two 180 W amplifiers per speaker

Overview

Brand Grimm Audio
Model LS1v2
Type Active
Way System 2-way
Positioning Floorstanding
Country of Origin Netherlands
Finish Natural Bamboo Veneer
SKU GRIMM-LS1-V2

Drivers

Woofer 8 inch magnesium (Seas)
Tweeter 1 inch dome (Seas)

Amplification

Amplifier Power Two 180 W amplifiers per speaker
Amplifier Type Class D, Hypex NCore
Fail-safe Protection Excursion and thermal limiters

DSP & Crossover

DSP 48/76-bit DSP with digital I/O and AD/DA conversion
Crossover IIR crossover with exact LR4 acoustic slopes at 1550 Hz
Phase Correction Idealised inverted all-pass filter for maximally linear phase response
Clock Circuit Same clock circuit as the Grimm Audio CC1 master clock
Calibration Computer Aided Calibration during production

Frequency & Output

Controlled Bass Extension Down to 35 Hz (DSP-controlled)
Unidirectional Response Down to 250 Hz
Off-axis Response Well-behaved off-axis response

Enclosure & Dimensions

Box Volume 14 litres (sealed)
Dimensions (W x H x D) 52 x 115 x 16 cm
Stand Suspended between two half cylinders functioning as an integral two-legged floor stand

Connectivity

Audio Inputs Digital and analog audio inputs
USB Interface LS1i USB interface included for direct Mac or Windows connection
Subwoofer Output Filtered, DSP-controlled analog subwoofer output for stereo subwoofer integration
Remote Control Remote control of volume and settings

Warranty

Warranty 5-year limited warranty

Fit and constraints

Mixing and mastering engineers, and audiophiles… · Two 180 W amplifiers per speaker

Intended use

Use Mixing and mastering engineers, and audiophiles, who want a fully active, DSP-corrected two-way with phase-linear response and an integrated floor stand for near/midfield use in treated rooms. Its DSP-controlled analog sub output makes it a good anchor for a system that can later add stereo subwoofers for extended low end.
Not for Buyers who need very high SPL to fill large rooms, want deep bass well below 35 Hz without adding a subwoofer, prefer passive speakers or a fully analog signal chain, or want a compact desktop nearfield. Published sources reviewed do not state a maximum SPL or weight for the v2, so those needing a hard SPL/loading spec should confirm with the dealer first.

Constraints

PowerTwo 180 W amplifiers per speaker
ControlsDo not confuse the LS1v2 with the original LS1. Independent review data (the-ear.net) f...

To use it

Required appropriate audio and data cables, compatible monitoring, mounting, or power setup

Questions

3 to ask before buying

Which connections, drivers, operating systems, and sample rates are supported by this exact revision?

Ask before you buy via contact. Confirm power, condition grade, and included items against the listing photos.

What cables, mounts, power supplies, or licenses are included?

Ask before you buy via contact. Confirm power, condition grade, and included items against the listing photos.

Is the current retailer listing new stock, demo stock, open box, or special order?

Ask before you buy via contact. Confirm power, condition grade, and included items against the listing photos.

Description

Product details

The Grimm Audio LS1v2 is a fully active two-way studio monitor and hi-fi loudspeaker made in the Netherlands. Each cabinet pairs an 8-inch magnesium Seas woofer with a 1-inch dome tweeter driven by two 180W Class D Hypex NCore amplifiers, with an onboard 48/76-bit DSP handling AD/DA conversion, an IIR LR4 crossover at 1550 Hz, and phase linearization. The sealed 14-litre enclosure is suspended between two half-cylinder sides that double as an integral two-legged floor stand, and bass is controlled by DSP down to 35 Hz. It accepts digital and analog inputs, ships with the LS1i USB interface for direct Mac or Windows connection, and provides a DSP-controlled analog subwoofer output for integrating stereo subwoofers.

You may also like