ROYER R-122 MKII Matched Pair — Microphone
Royer R-122 MKII Matched Pair is a stereo pair of Royer's active ribbon microphones. Royer describes the R-122 MKII as a phantom-powered active ribbon microphone with switchable -15 dB pad and switchable bass-cut filter; when both switches are off, Royer states it operates for all purposes like an original R-122.
Specifications
Matched Pair
| Product type | Matched stereo pair of active ribbon microphones |
|---|---|
| Included | 2 microphones, 2 protective wood cases, 2 microphone socks and 2 microphone clips |
Transducer
| Operating principle | Electrodynamic pressure gradient with active electronics |
|---|---|
| Polar pattern | Figure-8 |
| Ribbon | 2.5 micron aluminum ribbon |
| Magnets | Rare-earth neodymium |
| Offset ribbon | Patented offset-ribbon technology, patent 6,434,252 |
Controls
| Pad | Switchable -15 dB pad before the microphone electronics |
|---|---|
| Bass cut | Switchable bass cut starting at 100 Hz, 6 dB/octave |
Electrical
| Frequency response | 30 Hz-15,000 Hz +/-3 dB |
|---|---|
| Sensitivity | -36 dB re 1 V/Pa +/-1 dB |
| Self noise | <18 dB |
| Output impedance | 200 ohms balanced |
| Maximum spl | >160 dB at 1 kHz; >135 dB at 30 Hz |
| Power | 48 V phantom power only, 4 mA supply current |
Fit and constraints
Intended use
Constraints
To use it
Questions
Which connections, drivers, operating systems, and sample rates are supported by this exact revision?
Ask before you buy via contact. Confirm power, condition grade, and included items against the listing photos.
What cables, mounts, power supplies, or licenses are included?
Ask before you buy via contact. Confirm power, condition grade, and included items against the listing photos.
Is the current retailer listing new stock, demo stock, open box, or special order?
Ask before you buy via contact. Confirm power, condition grade, and included items against the listing photos.
Description
Royer R-122 MKII Matched Pair is a stereo pair of Royer's active ribbon microphones. Royer describes the R-122 MKII as a phantom-powered active ribbon microphone with switchable -15 dB pad and switchable bass-cut filter; when both switches are off, Royer states it operates for all purposes like an original R-122. The mic uses an electrodynamic pressure-gradient figure-8 transducer with a 2.5 micron aluminum ribbon, rare-earth neodymium magnets, patented offset-ribbon technology and a Royer-designed toroidal transformer feeding a fully balanced discrete active head amplifier. Manufacturer specs list 30 Hz-15 kHz +/-3 dB response, -36 dB sensitivity, <18 dB self-noise, 200 ohm balanced output impedance, 1 kOhm minimum load, >160 dB SPL at 1 kHz and >135 dB at 30 Hz, 48 V phantom power at 4 mA, 206 x 25 mm dimensions and 309 g weight per microphone. Retailer matched-pair data lists two microphones with wood cases, socks and clips.