TASCAM ML-32D — Converter
TASCAM ML-32D — Converter
TASCAM ML-32D is a 1U 32-channel analog/Dante converter for inserting and extracting line-level analog audio on a Dante network.
Specifications
Format
| Product type | 32-channel analog/Dante converter |
|---|---|
| Rack format | 1U rackmount |
| Conversion | 32 analog line inputs and 32 analog line outputs to/from Dante |
Analog I/O
| Connectors | D-sub 25-pin female connectors for analog input and output |
|---|---|
| Input impedance | 10 kOhm or higher |
| Output impedance | 200 ohm or lower; applicable load 2 kOhm or higher |
| Reference levels | +24, +22, +20, +18 or +15 dBu selectable maximum level options |
Network
| Dante ports | Primary and secondary RJ45 Dante ports |
|---|---|
| Redundancy | Primary/secondary connectors support redundant duplex network operation |
| Network standard | 1000BASE-T Gigabit Ethernet with Cat 5e or faster STP cable |
| Interoperability | Dante with AES67/Ravenna compatibility and SMPTE 2110-30 support via firmware |
Audio Performance
| Sample rate bit depth | Up to 96 kHz / 24-bit |
|---|---|
| Frequency response | 20 Hz-20 kHz +0.1/-0.5 dB at 44.1/48 kHz; 20 Hz-40 kHz +0.1/-0.5 dB at 88.2/96 kHz |
| Thd n | 0.001% or lower |
| Snr | 113 dB or higher |
| Crosstalk | 115 dB or higher |
Power
| Power | AC 100-240 V, 50/60 Hz; 22 W consumption |
|---|
Fit and constraints
Intended use
Constraints
To use it
Questions
Which connections, drivers, operating systems, and sample rates are supported by this exact revision?
Ask before you buy via contact. Confirm power, condition grade, and included items against the listing photos.
What cables, mounts, power supplies, or licenses are included?
Ask before you buy via contact. Confirm power, condition grade, and included items against the listing photos.
Is the current retailer listing new stock, demo stock, open box, or special order?
Ask before you buy via contact. Confirm power, condition grade, and included items against the listing photos.
Description
TASCAM ML-32D is a 1U 32-channel analog/Dante converter for inserting and extracting line-level analog audio on a Dante network. TASCAM specifies 32 analog line inputs and 32 analog line outputs on D-sub 25-pin connectors, primary and secondary RJ45 Dante ports for redundant networking, Dante Controller routing, AES67/Ravenna compatibility and SMPTE 2110-30 support via firmware. It operates at 24-bit resolution up to 96 kHz and provides signal/overload indicators plus DIP-switch selectable reference levels of +24, +22, +20, +18 or +15 dBu. Published performance includes 20 Hz-20 kHz response at 44.1/48 kHz, 20 Hz-40 kHz response at 88.2/96 kHz, THD+N 0.001% or lower, S/N ratio 113 dB or higher and crosstalk 115 dB or higher. Physical specs are 483 x 45 x 303.8 mm and 3.5 kg.